This article describes how to troubleshoot blurry printing.

Symptom:

  *Before you start, please make sure:

- The pod is not expired

- The pod is not damaged

- The pod is not dirty or clogged

- The black plastic part + metal part are in place

Action:

1. Fill the cup all the way to the top:

2. Make sure you have a good printing surface:

3. Make sure your Ripple Maker is on a steady, level surface

4. Perform the pod-set up procedure.

5. Perform the advanced pod set up procedure.

6. Replace the pod:

Tap "Replace Pod" and follow the steps:

If the problem persists please contact Ripples' support- Support@Drinkripples.com or call your local support number.