Niv Mizrahi
- Total activity 101
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 56
Activity overview
Latest activity by Niv Mizrahi-
Niv Mizrahi commented,
Hi Leo! Thank you for your comment. Please contact support at: Support@drinkripples.com or call your local care center. They would love to answer all of your questions. Thanks again.
-
Niv Mizrahi created an article,
Power Supply AM/PM - Certification
Power Supply Certification. See attached.
-
Niv Mizrahi created an article,
Ripple Maker AM/PM - Certifications
See attached the Ripple Maker Certifications.
-
Niv Mizrahi created an article,
Ripple Maker AM/PM - Downgrade is not supported
Legacy Articel:While trying to update your Ripple Maker AM/PM, you see the following notification: "Downgrade is not supported" This is normally caused by mismatched software versions. When the act...
-
Niv Mizrahi created an article,
How to open the back door
This article describes how to open the Ripple Maker's back door. 1. Push the black head / lead back as show at the photo below: 2. At the back - Unscrew the screw on the top left corner: ...
-
Niv Mizrahi created an article,
Ripple Maker AM/PM - Printer Error - Printer State DEVICE_NOT_FOUND
This article describes how to troubleshoot "Printer Error - Printer State DEVICE_NOT_FOUND" error. Symptom: In order to troubleshoot this issue, please email to support- Support@Drinkripples....
-
Niv Mizrahi created an article,
Ripple Maker AM/PM - Uninstall + disconnect USB printer (Update issues)
This article continues the troubleshooting of "Software update issues". 1. Disconnect the Printer USB at the back of the Ripple Maker and re-connect it again: 2. On the side menu, tap "Advance...
-
Niv Mizrahi created an article,
How to define proxy server
How to define the Proxy server - Ethernet: 1) Tap "Advanced": 2)Tap "Ethernet settings": 3)Tap "Advanced Settings": 4) Define the Proxy server: How to define the...
-
Niv Mizrahi created an article,
Ripple Maker AM/PM - Uninstall all applications
This article describes how to uninstall all applications in the Ripple Maker via the Android settings. A. Connect to the internet then, enter into the Android Settings: B. Tap "Apps". C. Tap on...
-
Niv Mizrahi created an article,
Ripple Maker's Mobile Queue does not sync
This article describes how to troubleshoot issues regarding the synchronization of the mobile queue. Symptom: Action: 1. Make sure the Ripple Maker is connected to the internet. 2...