How to Pod Setup in Ripple Maker Original - procedure is not improving the Print Quality, see the following image as an example:

Before Advanced Pod Setup

Required Outcome:

Before you start the process please make sure the pod is clean & undamaged:

1.  

   • Make sure the pod is not damaged: be very gentle when installing and removing the cartridge. Rough installation causes this damage. 

    

    

    

    

    

   • Make sure the bottom of the pod is not clogged: 

    

   

    

2. On the side menu, tap "Advanced":

Follow the on-screen tutorial, make sure:

1. Use an empty cup

2. The Ripple Maker tray will go up and down 3 times.

3. After the Advanced Pod Setup finishes, the Ripple Maker instructs you to perform the Pod Setup process one more time.

4. If the Pod Setup results are not as the required, please run Advanced Pod Setup 1 more time.

5. Replace the pod:

   Tap "Replace Pod" and follow the steps:

    

    

   

   

   If you need any further assistance please contact Ripples' support- Support@Drinkripples.com or call your local support number.