This article describes how to troubleshoot software update issues.
1. Make sure the Ripple Maker is connected to the internet.
2. Go to the "start" screen:
Tap the settings button() at the bottom of the screen, then tap "Update".
Tap "CHECK AGAIN" 3-4 times until you see the "DONE" button:
3. Tap the Overview() and close all open applications:
4. Turn off and back on:
Press the power button until the white light turns off.
In order to continue - please call your local Care Center or Send an email to Support@Drinkripples.com.
Ripples Zendesk Agent - tap here.